Z2000 Series 220V in 380V Out Inverter
Product Introduction
- Open-loop vector control, VF control；
- Easy to debug, with excellent performance；
- Optional built-in EMC filter, supports MODBUS RS485 communication, supports MODBUS RTU, and optional EtherCAT communication；
- Support permanent magnet synchronous motors；
- It has an overload capacity of 150% of rated current for a continuous 60 seconds and 180% of rated current for a continuous 3 seconds, and can handle frequent impact loads；
- Phase loss protection, overheat protection, overvoltage protection and other protection functions；
- NPN supported, PNP optional；
- Support detachable LED keyboard；
- High torque output ensures smooth startup of the motor during heavy loads；
- ZONCN independently developed IGBTs, with excellent performance；
Technical specifications
| Item | Specification |
| The highest frequency | Vector control: 0 - 320 Hz V/F control: 0 - 3200 Hz |
| Carrier frequency | 0.5 kHz to 16 kHz The carrier frequency can be automatically adjusted according to the load characteristics. |
| Input frequency resolution | Digital setting: 0.01Hz Analog setting: Maximum frequency × 0.025% |
| Control method | Open-loop vector control (without PG) V/F control |
| Starting torque | G model: 0.5Hz/150% (without PG); P model: 0.5Hz/100% |
| Speed regulation range | 1:100 (without PG) |
| Steady speed accuracy | ±0.5% (without PG) |
| Torque control accuracy | ±5%（FVC） |
| Overload capacity | G-type inverter: 150% of rated current for 60s; 180% of rated current for 3s.P-type inverter: 120% of rated current for 60s; 150% of rated current for 3s. |
| Torque increase | Automatic torque increase; Manual torque increase: 0.1% to 30.0% |
| VF curve | Three modes: Linear type; Multi-point type; N-th power V/F curve (1.2th, 1.4th, 1.6th, 1.8th, 2nd power) |
| VF separation | Two methods: Complete separation, Partial separation |
| Acceleration and deceleration curve | Linear or S-curve acceleration/deceleration mode. Four sets of acceleration/deceleration times. Acceleration/deceleration time range: 0.0 ~ 6500.0 s |
| DC braking | DC braking frequency: 0.00 Hz ~ maximum frequency Braking time: 0.0 s ~ 100.0 s Braking current: 0.0% ~ 100.0% |
| Jog control | Jog frequency range: 0.00 Hz ~ 50.00 Hz. Jog acceleration/deceleration time: 0.0 s ~ 6500.0 s. |
| Simple PLC, multi-speed mode Operation | Through the built-in PLC or control terminals, up to 16 speed runs can be achieved. |
| Build-in PID | It can conveniently realize the closed-loop control system for process control. |
| Automatic Voltage Regulation (AVR) | When the grid voltage changes, it can automatically maintain the output voltage constant. |
| Overvoltage and overcurrent speed control | Automatically limits current and voltage during operation to prevent frequent overcurrent and overvoltage tripping. |
| Fast current-limiting function | Minimize overcurrent faults to ensure the normal operation of the frequency converter |
| Torque Limitation and Control | 'Excavator' characteristic: automatically limits torque during operation to prevent frequent overcurrent tripping. |
| Outstanding performance | Using high-performance current vector control technology to achieve asynchronous motors |
| Instant stop, no pause. | During an instantaneous power outage, energy is fed back to the load to compensate for the voltage drop, allowing the frequency converter to continue operating for a short period of time. |
| Fast current limiting | Prevent the frequency converter from frequently experiencing overcurrent faults |
| Timed control | Timing Control Function: Set time range from 0.0Min to 6500.0Min |
| Communication methods support | RS485；EtherCAT； |
| Command source | Set by operation panel, set by control terminals, set by serial communication port.Switchable via multiple modes. |
| Frequency source | 10 frequency sources: digital reference, analog voltage reference, analog current reference, pulse reference, serial port reference. Switchable via multiple modes |
| Auxiliary frequency source | 10 types of auxiliary frequency sources. They can be flexibly used for auxiliary frequency fine-tuning and frequency synthesis. |
| Input terminal | Standard: 6 digital input terminals, 1 of which supports high-speed pulse input up to 100 kHz (S3 optional); 2 analog input terminals: 1 supports only 0–10 V voltage input (FIV), 1 supports 0–10 V voltage input or 4–20 mA current input (FIC). |
| Output terminal | Standard: 1 digital output terminal (MO1) 1 relay output terminal (RA, RB, RC) 1 analog output terminal, supporting 0~20 mA current output or 0~10 V voltage output (FOV) |
Specification parameters
| Inverter model | Rated output power / KW | Rated input current / A | Rated output current / A | Matching motor / KW |
| AC 220V±15% 1PH AC 380V±15% 3PH | ||||
| Z2200-0R4G-4-3PH | 0.4KW | 3.7 | 1.2 | 0.4KW |
| Z2200-0R75G-4-3PH | 0.75KW | 7.8 | 2.5 | 0.75KW |
| Z2200-1R5G-4-3PH | 1.5KW | 11.8 | 3.8 | 1.5KW |
| Z2200-2R2G-4-3PH | 2.2KW | 15.9 | 5.4 | 2.2KW |
| Z2200-3R7G-4-3PH | 3.7KW | 28.0 | 9 | 3.7KW |
| Z2200-5R5G-4-3PH | 5.5KW | 40.5 | 13 | 5.5KW |
| Z2200-7R5G-4-3PH | 7.5KW | 53.0 | 17 | 7.5KW |
| Z2200-11G-4-3PH | 11KW | 77.9 | 25 | 11KW |
| Z2200-15G-4-3PH | 15KW | 99.7 | 32 | 15KW |
| Z2200-18G-43PH | 18.5KW | 115.2 | 37 | 18.5KW |
| Z2200-22G-4-3PH | 22KW | 140.2 | 45 | 22KW |
Copyright © Copyright:ZONCN Record number:1943255 sitemap（Baidu / Google）
Technical SupportJinfeng Operations 统计代码放置
Service Hotline
administrator
There are currently no comments on this content